Batteries can be generally classified into three major categories: chemical batteries, physical batteries, and biological batteries. Among them, chemical batteries and physical batteries have been applied in mass-produced electric vehicles, while biological batteries are regarded as one of the important development directions for future electric vehicle batteries. Considering the current practical application situation, we will only provide a detailed introduction to chemical batteries.
I. Lithium Batteries
Lithium batteries are one of the most commonly used battery types in electric vehicles. Although they have only been around since 1970, they have quickly dominated the electric vehicle battery market due to their high energy density and long cycle life. Currently, the lithium batteries used in electric vehicles mainly include lithium iron phosphate batteries and lithium nickel manganese cobalt oxide batteries, and these two types of batteries have significant differences in their own characteristics, so it is necessary to provide a detailed explanation and comparison of them.
(1) Lithium Iron Phosphate Batteries
Compared with the early lithium manganese oxide batteries, lithium iron phosphate batteries do not have a significant difference in energy density, which is approximately 100-110 Wh/kg. However, their thermal stability is the best among current vehicle lithium batteries. The internal chemical components only start to decompose when the battery temperature reaches 500-600°C, while the internal chemical components of lithium cobalt oxide batteries, which are also lithium batteries, are already in an unstable state at 180-250°C. In other words, the safety of lithium iron phosphate batteries is the best among lithium batteries, and for this reason, they have become one of the main types of batteries for electric vehicles.
(2) Lithium Nickel Manganese Cobalt Oxide Batteries
Compared with lithium iron phosphate batteries, the lithium nickel manganese cobalt oxide batteries used in Tesla Model S have a much higher energy density by weight, approximately 200 Wh/kg. This means that lithium nickel manganese cobalt oxide batteries of the same weight have a longer driving range than lithium iron phosphate batteries. However, their disadvantages are also obvious. When the battery temperature is 250-350°C, the internal chemical components start to decompose, which puts extremely high demands on the battery management system. Each battery cell needs to be equipped with a separate safety device. In addition, due to the small size of each cell, the number of battery cells required for a single vehicle is very large.
II. Nickel-Metal Hydride Batteries
Nickel-metal hydride batteries are another mainstream type of electric vehicle power battery besides lithium batteries. They have gradually developed since the 1990s. Many hybrid vehicles, such as the Toyota Prius, use this type of battery as the energy storage component. Their energy density is not much different from that of ordinary lithium batteries, approximately 70-100 Wh/kg. However, since the voltage of a single battery cell is only 1.2V, which is one-third of that of lithium batteries, the volume of the battery pack is larger than that of lithium batteries when the required voltage is the same.
Like lithium batteries, nickel-metal hydride batteries also require a battery management system, but they pay more attention to the charging and discharging management of the battery. The reason for this difference is mainly due to the "memory effect" of nickel-metal hydride batteries, which means that the battery capacity will decline during the cycle of charging and discharging. Overcharging or overdischarging may also accelerate the capacity loss of the battery (this characteristic of lithium batteries can almost be ignored). Therefore, for manufacturers, the battery control system of nickel-metal hydride batteries is set to actively avoid overcharging and overdischarging, such as artificially controlling the charging and discharging range within a certain percentage of the total capacity to reduce the rate of capacity decline.





